Halytech has a range of ultra-low-power long-range wireless modules suitable for meter monitoring, temperature monitoring, 0-5 Volt and 4-20mA monitoring.

Battery powered units can operate for up to 10 years

Indoor up to several hundred meters without a repeater outdoor line-of-sight range can reach up to 1 km

WTX-OB (Outdoor)

Battery Powered Wireless Transmitter (Outdoor Use)
Connects to up to 4 utility meters

Learn More

WTX-C (Outdoor)

Battery Powered Compact Wireless Transmitter (Outdoor Use)
Connects to up to 4 utility meters

Learn More

WTX-IB (Indoor)

Battery Powered Wireless Transmitter (Indoor Use)
Connects to up to 4 pulse meters with tamper detection

Learn More

WTX-IM (Indoor)

Mains Powered Wireless Transmitter (Indoor Use)
4 pulse meters with tamper detection

Learn More

Halytech has a range of solution for use in environmental monitoring, metering for carbon monitoring and efficiency, industrial applications and sports lighting.

Data Loggers

Complete range of self-contained data logging and telemetry system
For short and long term monitoring
Installations in the toughest environments

Learn More

Automatic Meter Readers

Complete range of Wired and Wireless Utility meter monitoring of water, electricity and gas

Learn More

Sport Field Lighting Control

Floodlight control and facility monitoring system for sports fields, parks and other public places.

Learn More

Remote Input Module

Input expansion module for the Spider. Ideal for utility meter monitoring in residential, commercial and industrial applications.

Learn More

Wireless Receiver

Enables connection of utility meter monitoring in existing buildings, long term monitoring of industrial process

Learn More

Wireless Transmitters

Halytech has a range of ultra-low-power long-range wireless modules suitable for meter monitoring, temperature monitoring, 0-5 Volt and 4-20mA monitoring.

Learn More

Accessories

Range of accessories from cables through power supplies to complete enclosures.

Learn More

Approved NSW Non-Urban Water Metering Local Intelligence Device

Halytech meterwatch is a premium data logger and telemetry device offering the longest battery life in its class. This economical self-contained Local Intelligence Device (LID) is designed specifically for the NSW Non-Urban Water Metering Framework.

meterwatch comes fully configured and site ready. A unique, easy to use web interface lets installers connect to meterwatch to set up and verify meter calibration, mobile signal strength and internet connectivity. Any computer with a browser can be used and no special software is required.

The compact waterproof (IP-68) enclosure makes it suitable for installation in the toughest environments.

Extremely low power operation and field life in excess of 10 years is achieved by utilising the latest LTE Cat M1 communication technologies.

The combination of LTE Cat M1 and flexible external antenna configuration ensures you get the best communications performance poor mobile reception areas.

meterwatch is backed by a 7-year product and battery warranty*.

meterwatch:

• Is fully approved LID for the NSW DAS Non-urban water metering framework
• Is economical to buy, install and operate
• Monitors a single pulse meter with cable and enclosure tamper detection
• Automatically sends data and alarms to the cloud-based NSW Data Acquisition Service (DAS)
• Records usage and alarm data for long term local retrieval
• Uses an LTE Cat M1 modem for optimal signal and battery performance
• Is designed for installation in harsh environments
• Can operate for more than 7 years on its replaceable internal battery

A LANlink Cable (sold-separately) is required to connect meterwatch to a computer.

Halytech can recommend or supply a range of external antennas to suit your applications

The microSpider lite is an economical self-contained data logging and telemetry system. It includes all software, hardware, batteries and a built-in mobile phone module. The compact waterproof (IP-68) enclosure makes it suitable for installations in the toughest environments.

microSpider lite is ideal for simple applications such as metering, tank monitoring and level monitoring.

No software is required on your computer to set up or interrogate a microSpider lite.

The microSpider lite can:

• monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
• generate SMS, email and twitter alarms
• record data
• send reports via e-mail, FTP or HTTP
• communicate via internal 3G/4G or LTE Cat M1 modem
• be used in wet environments
• operate for more than 5 years on its replaceable internal battery
• update software automatically in-field from remote servers, or update from connected PC.

The microSpider lite is ideal for short and long-term monitoring. It can interface with a wide range of sensors and meters. The browser interface makes it easy to set up and test, and there is no need for external power, batteries or solar panels.

The "M" variant features even lower power consumption by utilising the latest LTE Cat M1 communication technology.
microSpider lite can communicate over private networks as used by large government and commercial entities.

Once installed the microSpider lite will log data and automatically send reports directly to the end user via e-mail, FTP or HTTP.
No specialised web portals or software subscriptions are required.

User configurable alarms can send SMS, e-mail and twitter alarm messages and automatically initiate sending of data reports.

Note: A LANlink Cable (sold-separately) is required to connect the microSpider lite to a computer for configuration via the built-in web server.

Economical – low upfront, installation and operational costs

Easy to use – simple familiar web browser interface

Easy to install

Internal batteries - no external batteries, power supplies or solar panels

Integrated mounting – bolt straight to wall

Waterproof enclosure – no need for extra enclosures

Can be managed remotely using SMS commands or FTP server

No special software required

setup and download using browser

reports sent straight to your PC or server

text/csv reports open in Excel

receive reports via email, FTP or HTTP

No licenses, royalties or service agreements

Large internal memory – full local backup of data

Physical

Dimensions: (approx) 165(W) x 80(H) x 85 (D) mm

Weight: (approx) 800 g

Enclosure: ABS rated IP - 68 with integrated mounting

Operating temperature: -5 to +50 degrees Celsius

Data Recorder

Capacity: approximately 400,000 records

Storage memory: Non-volatile FLASH

Time resolution: 1 second

Download format: CSV file

Battery

Integrated long life lithium batteries (up to 10 years battery life depending on application)

Warranty

Factory backup 12 months parts and labour guarantee

Inputs

Number of inputs:

• 2 digital
• 2 analog
• 4 system inputs
• Up to 8 Modbus (with factory RS-485 interface option)

Digital Inputs:

• 0 - 12V DC Voltage or voltage-free switch contact
• Can be used as switch, event (rainfall), counter or utility meter inputs (user selectable)

Analogue Inputs: Resolution 12 bits

• 4 - 20 mA, common ground
• 0 - 2.4V, common ground
• 0 - 5V, common ground
• 0 - 10V, common ground

Counter / Event Inputs

• Minimum pulse width: 5 ms
• Maximum frequency: 100 Hz
• Range: 0 - 999,999

System Inputs:

• System temperature
• Battery voltage
• LAN power voltage
• Internal moisture sensor

Outputs

Number of outputs 2

• 1 x Open collector for accessory control
• 1 x Low power sensor supply (3.3V or 5V)

Alarms

Number of alarms: 16

Type: SMS, twitter and/or e-mail transmission

Trigger: User definable input and trigger point

SMS / e-mail / twitter text: 1 per alarm, user definable

Number of phone numbers: 3 per alarm, user definable

Number of e-mail addresses 3 per alarm, user definable

Communication Interfaces

Ethernet 10 base-T, RJ-45 connector on comms cable

Cellular phone module: Built-in 4G/3G or LTE Cat M1

Antenna: internal antenna - standard, external antenna - option

Internet connectivity: 4G, 3G, LAN (with LANlink cable)

Product is available in a variety of configurations to suit your needs, you may specify any of the following:

• Internal Modbus RS-485 interface
• Internal or external antenna
• 3G/4G or LTE Cat M1
• Connector or Flying Lead for input
• DNP3
  Compliant with Level 2 of the DNP3 standard, supporting all of the microSpider2's inputs and controls, the DNP3 option allows the microSpider2 to communicate with a SCADA system via 3G/4G modem or local area network.

microSpider Battery

LANlink Cable (required to connect microSpider2 Environmental to a computer)

SDI-12/Modbus Interface

Software

microSpider Lite Software v1.92 (Zip)

microSpider Lite Modbus RS-485 Software v1.92 (Zip)

microSpider Lite Digital Software v1.92 (Zip)

Manuals / Brochures

microSpider Lite Brochure

microSpider Lite Quick Start Guide

microSpider2 Manual V1.26

Instructional Videos

Installing the O-ring

DNP3

microSpider2 Device Profile

microSpider2 XML Device Profile (Zip file)